Loading ...
Loading ...
Loading ...
TO REMOVE DUST BAG
iii nl ,innl, , i
WARNING
Always unplug power cord from
electrical outlet before performing
any service on vacuum.
Pull out on the
bag cover
release located
near the top of
the bag cover.
Bag /_l l
Cover_
oovor-ll
Grasp the dust bag
collar and pull gen-
tly, carefully remov-
ing the dust bag.
'Throw away the
used dust bag.
Do not reuse.
Pull the bag
cover forward
and lift up
Remove and
lay aside.
Bag
BagHolder Check the bag
holder and the
- Bag Cavity motor safety ill-
ter_ If either is
blocked, check
Safety TROUBLE_
Filter SHOOTING.
CAUTION
NEVER REUSE A DUST BAG. Very
fine materials, such as carpet
freshener, face powder, fine dust,
plaster, soot, etc. can clog the bag
and cause it to burst before it is
full. Change bag more often when
vacuuming these materials.
TO REPLACE DUST BAG
Unfold the
new dust bag° oust
Fold the safety Bag
seal tab on the
new dust bag
away from the
opening that
fits on the bag
holder.
NOTE: See PARTS AND FEATURES for
Bag number.
insert the dust bag
onto the bag holder
completely by holding
the bag collar.
Tuck the bag
behind each of
the four bag
retention corner
flaps shown here.
Be sure the bot-
tom and sides of
the dust bag are
completely within
bag cavity prior to
replacing the bag
cover_
Place the dust bag
collar into position.
Position the bag
cover so its
positioning tabs
fit into the body
positioning tab
slots,
Close the bag
cover_
You will hear a
distinct snap
when cover is
securely closed.
Check to see
that the dust
bag is fully enclosed in the bag cover.
14 ....
Loading ...
Loading ...
Loading ...