Loading ...
Loading ...
Loading ...
Checkmotorsafetyfilterfrequentlyand
changewhendirty.
WARNING
Electrical Shock Hazard
Unplug power cord from electrical
outlet. Do not operate the cleaner
without the motor safety filter. Be
sure the filter is dry and properly
installed to prevent motor failure
and/or electrical shock.
Remove the dust bag as outlined in the
DUST BAG CHANGING section.
MOTOR SAFETY FILTER
ELECTROSTATIC
1. This white & grey
filter must be
replaced when dirt;,/.
It should be
replaced regularly
depending on use
conditions,, The fil-
ter CANNOT be
washed as it will
lose its dust trap-
ping ability.
Motor f_
Safety ._"._ "_h_
Filter " "_."_
NOTE: See PARTS AND FEATURES for
motor safety filter number,r
Filter " "_'__
2. If the filter,
located in the bot-
tom of the bag
cavity, is dirty,
remove it by
pulling forward out
from under the
ribs.
3. Replace the
filter, white side
up, by sliding it
back into place
under the ribs in
the bag cavity
Motor
Replace the bag as outlined in the DUST
BAG CHANGING section.
WARNING
Do not operate without exhaust
filter.
EXHAUST FILTER
HEPA
The exhaust filter cartridge must be
replaced when dirty. It should be
replaced regularly depending on use con-
ditions. The filter CANNOT be washed
as it will lose its dust trapping ability.
NOTE: See PARTS AND FEATURES for
the exhaust filter number,
Slide the
exhaust fiffer
cover release
down. Pull out
on exhaust film
ter cover to
remove from
bag cover_
Exhaust Filter /1 I1
COvet Release._t_L_
cover_ _
Remove the
exhaust filter car-
tridge from the
bag cover..
Replace the exhaust filter
cartridge, carefully posio
tioning it so that it fits into
the bag cover. The grey
edge of the filter
should be facing away
from the operator. Push
only on filter cartridge
frame, not on filter itself.
Bag
Exhaust
Exhaust Filter !_
Cover Release
Exhaust _-_'_
Fittor / 1t!
Cover __
Replace the
exhaust filter
cover and
secure the
latch by push-
ing it upward.
15
Loading ...
Loading ...
Loading ...