Loading ...
Loading ...
Loading ...
1-32 Seat, seatbelt and SRS airbags
system, be sure to confirm that the
seatback is securely locked into
place. Otherwise, in an accid ent,
serious injury or death could result.
1. Shake the seatback slightly to confirm
that it is securely locked into place.
– For 5-door models, it is possible to
check whether the seatback is locked
visually. If the seatback is locked into
place, the red colored unlocking mar-
ker which is attached to the bottom of
the lock release knob is invisible. For
details, refer to “5-door models” F1-
10.
2. You will find marks “ ” at the bottom of
the rear seat seatbacks. These marks
indicate the positions of the lower an-
chorages (bars).
Remove the covers and locate the lower
anchorages (bars).
3. Remove the rear seat head restraint.
For details, refer to “Rear windows side
seating position” F1-8.
4. While following the instructions sup-
plied by the child restraint system manu-
facturer, connect the lower hooks onto the
lower anchorages located at “
” marks on
the bottom of the rear seatback. When the
hooks are connected, make s ure the
adjacent seatbelts are not caught.
5. [If your child restraint system is of a
flexible attachment type (which uses
tether belts to connect the child restraint
system properly to the lower anchorages)]
While pushing the child restraint into the
seat cushion, pull both left and right lower
tether belts up to secure the child restraint
system firmly by taking up the slack in the
belt.
6. Latch the top tether hook onto the
tether anchorage that is located behind
the rear seat and tighten the top tether
Loading ...
Loading ...
Loading ...