Loading ...
Loading ...
Loading ...
9
69
Refitting the wheel
Position the wheel.
Screw in the bolts fully by hand.
Removing the wheel
Remove the trim.
Release the wheel bolts using the
wheelbrace 1.
Place the jack 2 in contact with one
of the four locations A provided on
the underframe, the one closest to
the wheel to be changed.
Extend the jack 2 until its base
is in contact with the ground. En-
sure that the centreline of the jack
base is directly below the location
A used.
Lift the vehicle.
Remove the bolts and detach the
wheel.
Pre-tighten* using the wheelbrace 1.
* If your vehicle is fitted with alloy wheels, when tightening the bolts it is normal
to notice that the washers do not come into contact with the spare wheel. It is
fixed securely.
PRACTICAL INFORMATION
Loading ...
Loading ...
Loading ...