Loading ...
Loading ...
Loading ...
7
DRIVING
62
EASY mode
(automatic mode)
Select position E using the gear le-
ver.
The gear engaged is displayed on
the instrument panel screen.
The gearbox continuously selects
the most suitable gear.
If you press the accelerator pedal
beyond the point of resistance, the
2 Tronic gearbox selects the gear be-
low to permit sharper acceleration.
Manual mode
Place the gear lever in position M,
then change up or down through the
gears by pressing:
- rearwards, "+" to change up,
- forwards, "-" to change down.
The gear engaged is displayed on
the instrument panel screen.
In the event of under-revving, to pre-
vent any risk of stalling, the gear be-
low is selected automatically.
In the event of overheating of the
clutch, position N is selected auto-
matically and the symbol N flashes
accompanied by an audible signal.
Operating faultStopping the vehicle
Before switching off the engine, you
can change to position N to be in
neutral.
In all cases, it is essential that you
apply the handbrake to immobilise
the vehicle.
With the ignition on, the
lighting of this warning light
indicates a gearbox mal-
function.
Contact a PEUGEOT dealer.
On a slope, use the brake to
immobilise the vehicle and
place the gear lever in posi-
tion N, E or R.
Do not keep the vehicle immobilised
using the accelerator.
It is compulsory to press the
brake pedal while starting
the engine.
Never select neutral N while
the vehicle is moving.
In all cases, it is essential to
apply the handbrake to im-
mobilise the vehicle.
Loading ...
Loading ...
Loading ...