Loading ...
Loading ...
Loading ...
43
Displaying the rmware
version
1 Display the “System” setting screen.
Displaying the “System” setting screen on page 40
2 Touch [System Information].
3 Touch [Firmware Information].
The “Firmware Information” screen appears.
Updating rmware
CAUTION
● The USB storage device for updating must contain only the
correct update file.
●
Never turn this product off, disconnect the USB storage
device while the firmware is being updated.
●
You can only update the firmware when the vehicle is
stopped and the parking brake is engaged.
1 Download the firmware update files.
2 Connect a blank (formatted) USB storage
device to your computer, and then locate the
correct update file and copy it onto the USB
storage device.
3
Connect the USB storage device to this product.
4 Turn the source off.
Selecting a source on page 11
5 Display the “System” setting screen.
Displaying the “System” setting screen on page 40
6 Touch [System Information].
7 Touch [Firmware Update].
8 Touch [Continue] to display the data transfer
mode.
p Follow the on-screen instructions to finish updating the
firmware.
p This product will reset automatically after the firmware
update is completed if the update is successful.
p If an error message appears on the screen, touch the display
and perform the above steps again.
System settings
Displaying the “Audio” setting
screen
1 Press .
2 Touch , and then .
The “Audio” setting screen appears.
Using fader adjustment
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 43
2 Touch [Fader].
3 Touch or to adjust the front/rear speaker
balance.
p “Front25” to “Rear25” is displayed as the front/rear speaker
balance moves from the front to rear.
p The default setting is “F/R 0”.
p Set “Front” and “Rear” to “0” when using a dual speaker
system.
You can also set the fader/balance by dragging
the point on the displayed table.
Using balance adjustment
p This function is available when “Standard Mode” is selected
as the speaker mode.
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 43
2 Touch [Balance].
3 Touch or to adjust the left/right speaker
balance.
p “Left25” to “Right25” is displayed as the left/right speaker
balance moves from the left to right.
p The default setting is “L/R 0”.
You can also set the fader/balance by dragging
the point on the displayed table.
Switching sound muting/
attenuation
You can automatically mute or attenuate the AV source volume
and the iPhone application volume when the navigation outputs
the guidance voice.
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 43
2 Touch [Mute Level].
3 Touch the item you want to set.
● ATT (default):
The volume becomes 20 dB lower than the current volume.
●
Mute:
The volume becomes 0.
●
Off:
The volume does not change.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of
each source to prevent radical changes in volume when switch-
ing between sources.
p
Settings are based on the FM tuner volume level, which
remains unchanged.
p This function is not available when the FM tuner is selected
as the AV source.
1 Compare the FM tuner volume level with the
level of the source you want to adjust.
2 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 43
3 Touch [Source Level Adjuster].
4 Touch or to adjust the source volume.
p If you directly touch the area where the cursor can be moved,
the SLA setting will be changed to the value of the touched
point.
p “+4” to “–4” is displayed as the source volume is increased
or decreased.
p The default setting is “0”.
Using the auto level control
This function corrects automatically the audio level difference
between the music files or the sources.
1 Display the “Audio” setting screen.
Displaying the “Audio” setting screen on page 43
2 Touch [Automatic Level Control].
3 Touch the item.
● Off (default):
Turns the auto level control setting off.
●
Mode1:
Audio adjustments
Loading ...
Loading ...
Loading ...