Loading ...
Loading ...
Loading ...
uuCharginguCharge the High Voltage battery using a Level 1 or 2 charger
462
Driving
1. Stop your vehicle at a station specified for
electric vehicles. Park with the charge lid
closest to the charge plug, just in front of
the driver’s door.
2. Put the transmission into
(P.
3. Turn off the power system.
4. Press and hold the charge lid release
button.
u The lid opens.
The illumination lamp inside the charge lid
comes on for a few minutes.
■
How to Charge (Level 2)
1Charge the High Voltage battery using a Level 1 or 2 charger
The High Voltage battery may not be charged even if
the charging connector is properly connected to the
vehicle’s inlet when the charging timer is set but the
timer has not yet started.
To avoid damage to the charger, take these
precautions:
•
Do not hit the charging connector components
with a hard object or drop them on the ground.
•
Do not pull, twist, tangle, drag or step on the
charging cable.
•
Do not use or store near any sources of heat.
•
Do not expose to liquids or use harsh chemicals to
clean.
If you unplug the charging connector from the inlet,
charging cancels automatically.
The charge speed slows down towards the
completion of the battery charging. When the High
Voltage battery temperature is low, the charge speed
may slow or it may not be fully charged.
Charge Lid
Release
Button
19 CLARITY PHEV-31TRW6100.book 462 ページ ２０１８年１０月２５日 木曜日 午後２時２９分
Loading ...
Loading ...
Loading ...