User Manual - Page 111

For 2019 Clarity PLUG-IN HYBRID.

Loading ...
Loading ...
Loading ...
109
uuIndicatorsuDriver Information Interface Warning and Information Messages
Continued
Message Condition Explanation
Appears when you press the fuel fill door release
button.
The display changes to Ready when the fuel vapor
pressure inside the fuel tank is released. You can start
refueling once Ready appears.
2 Refueling P. 454
Appears when the vehicle is ready to be refueled.
Appears when the high voltage battery and other
system control temperatures are too low to operate
(approx. –22°F [–30°C] or below).
You must wait for an increase in the ambient
temperature or move the vehicle to a warmer location.
Consult an authorized Honda Clarity Plug-In Hybrid
dealer.
In extremely cold climates, keep the vehicle stored in a
garage.
In extremely cold climates, keep the vehicle stored in a
garage and connect the charging connector.
Appears when the charging connector is
disconnected while the power mode is in ON with
the charging connector connected.
Set the power mode to OFF, then set it back to ON if
you drive again.
2 Turning on the Power P. 378
Appears when the high voltage battery temperature
is too low to operate (approx. −22°F [−30°C]).
You can start the engine and use the climate control
system to warm up the interior.
You must wait for an increase in the high voltage
battery temperature to drive.
U.S. models
Canadian models
Canadian models
19 CLARITY PHEV-31TRW6100.book 109 ージ 018年10月25日 木曜日 午後2時29
Loading ...
Loading ...
Loading ...