Loading ...
Loading ...
Loading ...
31
MAINTENANCE AND TROUBLESHOOTING
MAINTENANCE
Regular maintenance is important for optimal
performance and to reduce wear. Inspect and properly
tighten all parts each time the studio cycle is used.
Replace any worn parts immediately.
To clean the studio cycle, use a damp cloth and a small
amount of mild soap. IMPORTANT: To avoid damage
to the console, keep liquids away from the console
and keep the console out of direct sunlight.
CONSOLE TROUBLESHOOTING
If the console does not turn on, make sure that the
power cord is fully plugged in and that the power
switch is in the reset position. If there are exterior wires
on the console, make sure that the connectors on the
wires are oriented correctly and are connected firmly.
If you are having problems connecting the console
to a wireless network or if you are having problems
with your iFit account or iFit workouts, go to
support.iFit.com.
If the Console (10) does not stay in place when it is
moved to the desired position, tighten the indicated M8
Locknut (99) slightly until the Console stays in place.
If the console does not
boot up properly, or if
the console freezes and
does not respond, reset
the console to the fac-
tory default settings.
IMPORTANT: Doing this
will erase all custom
settings you have made
to the console. Resetting
the console requires two
people. First, press the
power switch and unplug the power cord. Next, locate
the small reset opening (A) on the top of the console.
Using a bent paper clip,
press and hold the reset
button inside the opening
(A), and have a second
person plug in the power
cord and press the power
switch. Continue holding the reset button until the con-
sole turns on. When the reset operation is complete,
the console will turn off and then turn back on. If it does
not, press the power switch off and then on again.
Oncetheconsoleturnson,checkforrmwareupdates
(see HOW TO CHANGE CONSOLE SETTINGS on
page 27). Note: It may take a few minutes for the
console to be ready for use.
INCLINE SYSTEM TROUBLESHOOTING
If the frame does not move to the correct incline level,
see HOW TO CHANGE CONSOLE SETTINGS on
page 27 and calibrate the incline system.
Note: When the studio cycle is declined or extremely
inclined, the range of resistance levels may decrease.
10
99
A
A
Loading ...
Loading ...
Loading ...