Loading ...
Loading ...
Loading ...
26
Accessing the basic settings
The hob must be switched off.
1. Switch on the hob.
2. Within the next 10 seconds, touch the 3 symbol for 3
seconds.
™‚ and light up as a preset in the displays.
3. Touch the 3 symbol repeatedly until the required function
appears in the display.
4. Then select the required setting with the twist knob.
5. Touch the 3 symbol for at least 3 seconds.
The settings have been saved.
Quit
To leave the basic settings, turn off the hob at the main switch.
Care and cleaning
The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition
Hob
Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cool enough
before attempting to clean it.
Only use cleaning products specifically designed for hobs.
Follow the instructions provided on the packaging.
Do not use:
Undiluted washing-up liquid
Dishwasher detergent
Abrasive products
Corrosive products such as oven sprays or stain removers
Sponges that may scratch
High-pressure or steam cleaners
The best way to remove stubborn stains is to use a glass
scraper. Follow the manufacturer's instructions.
Suitable glass scrapers can be obtained through the Technical
Assistance Service or from our online shop.
Hob frame
In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
Do not use sharp or abrasive products
Do not use a glass scraper
The Tipp control
For cleaning the Tipp control, warm water and a little soap is
recommended. Do not use abrasive or corrosive cleaning
products. Do not clean the Tipp control in a dishwasher or in
washing up water. Otherwise, it could be damaged.
™ˆ
Power-Management function
= Deactivated.*
= 1,000 W. minimum power.
= 1,500 W.
ƒ = 2,000 W.
etc.
Š or Š. = maximum power of the hob.
™‰
Working without the Tipp-Pad
Deactivated.
Activated.*
™‹
Return to default settings
Personal settings.*
Return to factory settings.
Indicator Function
*Factory settings
Loading ...
Loading ...
Loading ...