Loading ...
Loading ...
Loading ...
31
EN
The ice passage may become blocked with
frost if only crushed ice is used. Remove the
frost that accumulates by removing the ice bin
and clearing the passage with a rubber
spatula. Dispensing cubed ice periodically can
also help prevent frost buildup.
If discolored ice is dispensed, check the water
tank and the water supply for a possible
source. If the problem continues, contact the
LG Electronics customer information centre.
Do not use the ice or water until the problem
is corrected.
Never use thin crystal glass or crockery to
collect ice. Such containers may chip or break
resulting in glass fragments in the ice.
Dispense ice into a glass before filling it with
water or other beverages. Splashing may
occur if ice is dispensed into a glass that
already contains liquid.
Do not touch the ice outlet or the automatic
icemaker with your hand or a tool. Otherwise,
appliance damage or injury may occur.
When refitting the ice bin, ensure it is placed
correctly. If it is tilted or unleveled, it may not
continue to make ice due to sensor disruption.
Never use a glass that is exceptionally narrow
or deep. Ice may jam in the ice passage and
appliance performance may be affected.
Keep the glass at a proper distance from the
ice outlet. A glass held too close to the outlet
may prevent ice from dispensing.
Dispose of the ice inside the ice bin in the
freezer compartment if you go out on vacation
or an extended power outage occurs. Water
from melting ice may drop from the dispenser
onto the floor.
Door in Door (Optional)
Press the lever on the lower edge door in door
until it opens.
There is plenty of storage space inside the door
in door and its surrounding baskets, allowing
you to store food in an organized manner.
Removing the Case from the Door
in Door
Hold the case from inside the door in door with
both hands and remove it by lifting it upward.
Refitting the Door in Door Case
Mount them in the reverse order of the removal
process.
Loading ...
Loading ...
Loading ...