Loading ...
Loading ...
Loading ...
en Trouble shooting
32
Emptying the drip tray
With the cleaning functions, the residual water is
collected in the drip tray. Then empty and dry the drip
tray.
Caution!
■ Do not dry the drip tray in the hot cooking
compartment. This will damage the drip tray.
■ Do not clean the drip tray in the dishwasher. This will
damage the drip tray.
1. Briefly press on the centre of the tank cover.
The tank cover opens. The drip tray and water tank
can now be accessed.
2. Remove the drip tray from the tank recess.
3. Open the lid for the drip tray.
4. Empty the drip tray.
5. Insert the drip tray back into the tank recess and
slide it in fully.
6. Close the tank cover.
The appliance is ready to use.
3Trouble shooting
Tr ou bl e s hoot i ng
If a fault occurs, there is often a simple explanation.
Before calling the after-sales service, please refer to the
fault table and attempt to correct the fault yourself.
:Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
You can take remedial action yourself for some error
messages.
Troubleshooting
1 2
I
I
Error message Possible cause Remedy/Note
The appliance does not work The plug is not plugged into the mains Plug the plug in
Power failure Check whether the kitchen light works
The fuse is faulty Check in the fuse box to make sure that the fuse for
the appliance is OK
Faulty operation Switch off the fuse in the fuse box. Switch it back on
after approx. 10seconds
Although the appliance is switched on, it
cannot be operated; the D symbol is in
the display
The childproof lock is activated Press and hold D until the D symbol goes out
The interior lighting has failed. The LED bulb is defective Call our customer service
‚ƒ:‹‹ flashes in the display and the
0 symbol lights up.
Power failure Reset the clock
The appliance is not operating. A cooking
time is shown in the display.
start l stop was not touched after the setting
was made.
Touch start l stop or delete the setting by using the
function selector to select another function.
The microwave is not working. The door has not been properly closed. Check whether food residue or debris is trapped in
the door
start l stop was not touched. Touch start l stop
Loading ...
Loading ...
Loading ...