Loading ...
Loading ...
Loading ...
5
EN
ES
ES
PT
EL
AR
FA
To refit the operating valve:
• Place the operating valve in place making sure to
align it with the dot position (H).
• Press the valve then turn it until the desired position
is reached.
Using for the first time
• Fill the pressure cooker to the two-thirds mark (the
maximum mark) with water.
• Place the basket support (K) in the bottom of the
pressure cooker and place the basket (J) on top of it.
• Close the pressure cooker.
• Move the operating valve (A) to position .
• Place the pressure cooker on a heat source set to
maximum power.
• Once steam starts to escape from the valve, turn the
heat down and set a timer for 20 minutes.
• Once the 20 minutes are up, turn off the heat.
• Turn the operating valve (A) to position .
• Once the pressure indicator (D) drops down: your
pressure cooker is no longer under pressure.
• Open the pressure cooker.
• Rinse the pressure cooker with water and dry it.
Before cooking
• Before each use of the pressure cooker, always
remove the valve (A) (Refer to the “Using the
operating valve” heading) and visually check that
the operating valve seat (B) is not blocked. If
necessary, clean it with a toothpick - Fig 8
• Check that the safety valve (C) can move: Refer to
the “Care and Cleaning” heading.
• Refit the operating valve (A) and select the position
or .
• Always make sure that the pressure cooker is
properly closed before starting to heat it. The
opening button (E) must be in the position.
• Place the pressure cooker on a heat source set to
maximum power.
TF_EXPERT-PRO_INSFTW1_USA 04/12/13 11:48 Page5
Loading ...
Loading ...
Loading ...