Loading ...
Loading ...
Loading ...
Page 19 GDW45S 45cm Freestanding Dishwasher User Manual
Start of Dishwasher
The content of this manual is very helpful to the users.
After installation, please make sure to keep this manual.
Attention:
The following things should be checked before starting the dishwasher.
1 The dishwasher is level and fixed p roperly
2 The inlet water tap is open
3 Inlet hose connections are fully tightened and not leaking
4 The electrical power plug securely fitted to socket
5 The power is switched o n
6 The inlet and drain hoses are kinked and squashed
7 All packing materials and printings should be taken out from the dishwasher
How to Drain Excess Water From Hoses
If attaching drain hose directly to sink and it is above 1000mm high from floor level the excess water
in hoses cannot be drained directly into the sink. It will be necessary to drain excess water from
hoses into a bowl or suitable container that is held outside and lower than the s i nk. Drainage directly
into sink d r ain pipes via the dishwasher connection point is the preferred installation method.
Water Outlet
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks. Ensure
that the water drain hose is not kinked or squashed.
Extension Hose
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 3 metres; otherwise the cleaning effect of the dishwasher could be reduced.
Syphon Connection
The waste connection must be at a height less than 1000 mm (maximum) from the bottom of the dish.
The water drain hose should be fixed .
Loading ...
Loading ...
Loading ...