Loading ...
Loading ...
Loading ...
GDW45S 45cm Freestanding Dishwasher User Manual Page 18
14
Cold Water Connection
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure
that it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time, let the
water run to make sure that the water is clear. This precaution is needed to avoid the
risk of the water inlet to be blocked and damage the appliance.
Please close the hydrant after using.
WARNING!
Water Connection
Drain hose Connection
Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making sure
to avoid bending or crimping it. The top of the hose must be less than 1000mm.
WARNING: If dishwasher drain hose ois connected directly to sink drain pipe as per A shown below
through the dedicated dishwasher connector on the side of the drain pipe ensure the centre is drilled out
otherwise flooding will occur.
MAX 1000mm
A
Counter
Front
Drain pipe
NOTE
The top of the hose
must be less than
1000mm.
40mm
B
PLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, B
Loading ...
Loading ...
Loading ...