Loading ...
Loading ...
Loading ...
English - 31
OPERATING
(4) Fridge / Power Cool (3 sec)
The Fridge button serves two purposes:
- To set the Fridge to your desired
temperature.
- To turn the Power Cool function on and
o.
1. To set the Fridge temperature, press
the Fridge button.
You can set the temperature between
44°F (7°C) and 34°F (1°C).
2. Power Cool function
Touch and hold this button for 3 seconds
to decrease the time needed to cool
products in the Refrigerator.
It can be helpful if you need to quickly cool
easily spoiled items or if the temperature in
the fridge has warmed dramatically.
(For example, if the door was left open)
(5) Alarm
Touching this button turns the door open
alarm on and o.
If the door alarm is set to On, an alarm
beeps if any refrigerator door is left open
for more than two minutes.
The beeping stops when you close the
door.
The door alarm function is pre-set to On in
the factory.
You can turn it o by pressing and then
releasing the Alarm button.
You can turn it back on in the same
fashion.
The icon lights up when the function is on.
When the Door Alarm function is on and
the alarm sound is triggered, the Door
Alarm Icon will blink while the alarm
sounds.
(6) Ice Maker O
The Ice Maker O button serves two
purposes:
- To turn the Ice maker on and o
- To turn the Control Lock Function on
and o.
- Note that Ice Maker O mode will be
deactivated if you press and hold the
ice lever for more than 5 seconds.
1. Ice Maker O Function
If you don’t want to make more ice, press
the Ice Maker O button.
2. Control Lock Function
Touch and hold this button for 3 seconds
to lock the display and the dispenser
buttons so the buttons cannot be used.
When Control Lock is on, the refrigerator
does not dispense ice or water, even if the
Dispenser Lever is pressed.
The Control Lock icon lights up to indicate
you’ve activated the Control Lock function.
Press for 3 seconds to unlock.
If the ice maker function is ON, and the
water line is not connected, there will be a
water valve noise from the back of the unit.
Press the Ice Maker O (Control Lock
(3sec)) button for less than 3 seconds until
the Ice O Indicator ( ) lights up.
To save electricity, the Panel Display turns o
automatically under the following conditions: When
no button has been pressed, when no doors
are open, or when no Dispenser Lever has been
pushed.
However, the icon indicating your cubed or
crushed ice selection, will stay on.
When you press a button, open a door, or push
a Dispenser Lever, the Panel Display will turn on
again.
Except for the Water, and Cubed / Crushed
Ice buttons, all function buttons will become
operational after you remove your finger from the
button you are currently pressing.
DA68-03015B (EN)-10.indd 31 2017. 7. 7. �� 9:28
Loading ...
Loading ...
Loading ...