Loading ...
Loading ...
Loading ...
34
BEFORE YOU CALL
Visit our web site at
www.frigidaire.com
1-800-944-9044 (United States)
1-800-265-8352 (Canada)
CONCERN CAUSE SOLUTION
AUTOMATIC ICE MAKER
Ice maker is
not making any
ice.
• Icemakeristurnedo.
• Refrigerator is not
connected to water line
or water valve is not
open.
• The water supply line is
kinked.
• Thewaterlterisnot
seated properly.
• Thewaterltermaybe
clogged with foreign
material.
• Freezer ice maker wire
signal arm is being
held up by an item not
allowing it to go in the on
or down position. (Does
not apply to Frigidaire
Professional)
• Turn on ice maker. Press and hold the “ON-
OFF” button on the display panel for three
seconds until the indicator light turns on.
(Some Models) Move wire signal arm to the
“down” position on the ice maker.
• Connect the unit to the household water
supply and ensure the water valve is open.
• Ensure that the supply line does not kink
when the refrigerator is pushed into place
against the wall.
• For Frigidaire Gallery, remove and re-
installthewaterlter.Besuretopushthe
lterrmlysothatyouhearitlocksolidly
into position.
For Frigidaire Professional, remove
andre-installthewaterlter.Removeby
rotating it counter-clockwise (to the left)
90 degrees to release it. Re-install by
slidingitintothelterhousingasfarasit
will go with the grip end horizontal. Push
lightlyinwardonthelterwhilerotatingit
clockwise(totheright).Thelterwillthen
pull itself inward as it is rotated. Rotate the
lter90degreesuntilitstopsandthegrip
end is vertical. You may be able to feel a
verylightclickasthelterlocksintoplace.
• If water dispenses slowly or not at all, or
ifthelterissixmonthsoldorolder,it
should be replaced.
• Move any item or frozen ice cubes that
may block the signal arm from being in the
on or down position. See Automatic Ice
Maker-Freezer section in manual.
Loading ...
Loading ...
Loading ...