Loading ...
Loading ...
Loading ...
14
options
(∧ or ∨)
Used to enter and exit the
options menu and make
selections.
exit Toggles the options and run
modes.
control
locked
While in the locked state,
you will not be able to
change any settings on the
display nor dispense ice and
water. The “Control Locked”
indicatorwillashandan
audible warning tone is
played.
light Toggles dispenser light On
andO.
quick
freeze
on o
Activates a faster rate for
freezing food. Deactivates
after 12 hours.
quick ice
on o
Increases the production
of ice. Deactivates after 12
hours.
display
on o
Toggles the temperature
displaysOnandO.
refrigerator
temp
Allows the temperature
set-points to be adjusted.
Control temperatures range
from +33°F / +1°C to +47°F
/ +8°C.
freezer
temp
Allows the temperature
set-points to be adjusted.
Control temperatures range
from -6°F / -21°C to +6°F /
-15°C.
mode
°F °C
Toggles display from
Fahrenheit to Celsius.
power o Press and hold for three
secondstoturnothe
cooling system. It also turns
otheicemakerandall
dispenser functions. The
displaywillread“powero”.
water lter Displays the current status of
thewaterlter(Good,Order,
orReplace).Toresetthelter
status to “Good”, press and
hold the “set” key for three
seconds.
air lter Displays the current status of
theairlter(Good,Order,or
Replace).Toresetthelter
status to “Good”, press and
hold the “set” key for three
seconds.
default
settings
While in the default option,
press and hold the set key
for three seconds to reset all
refrigerator settings to their
factory default settings.
set (+ or -) Selects the current menu
selection option.
water Press the “water” key
to select water. A green
indicator light will be
illuminated above the active
feature.
cube Press the “cube” key to
select cubed ice. A green
indicator light will be
illuminated above the active
feature.
crush Press the “crush” key
to select crushed ice. A
green indicator light will be
illuminated above the active
feature.
Setting cooling temperatures
NOTE
Whenyourstpowerontherefrigerator,the
temperature displays 0°F and 37°F. After a
few seconds, both of the displays will switch
to “HI”. The displays will continue to show
“HI” for 20 minutes. After 20 minutes, the
High Temp alarm will sound and both dis-
plays will show the actual temperature.
1 Plus (+) and Minus (-) indicators are
located on the right side of the control
panel.
2 Press the + or - indicator to adjust the
temperature to the desired setting.
CONTROLS - FRIGIDAIRE GALLERY
Loading ...
Loading ...
Loading ...