Loading ...
Loading ...
Loading ...
10
English
IMPORTANT!
– The type plate is located at the
bottom of the system.
– Before connecting the AC power cord
to the wall outlet, ensure that all
other connections have been made.
–Never make or change any
connections with the power switched on.
–A separate power switch is provided
on the back of the subwoofer. Please
switch it on after completing all
connections in order to enjoy 5.1-channel
sound output.
Step 1: Set up the surround
speakers
1 Before connecting the speakers to the DVD
system, firmly attach the mini speaker stands to
the surround speakers as shown in the above
diagram.
OR
2 Alternatively, you can choose to mount the
speakers on the wall. Mount a screw (not
supplied) on the wall where the speaker is to be
hung and hook the speaker securely onto the
mounted screw.
Note:
– The surround speakers are labeled as REAR L.
(left) or REAR R. (right).
Connections
Step 2: Placing the speakers and
subwoofer
1
3
3
1
4
2
Center speaker and
DVD system
Surround
Subwoofer
Speaker (Left)
Surround
Speaker (Right)
Front speaker
(Left)
Front speaker
(Right)
For best possible surround sound, all the
speakers (except subwoofer) should be placed
at the same distance from the listening position.
1 Place the front left and right speakers at equal
distances from the TV and at an angle of
approximately 45 degrees from the listening
position.
2 Place the center speaker above the TV or the
DVD system so that the center channel's sound
is localized.
3 Place the rear speakers at normal listening ear
level facing each other or hang on the wall.
4 Place the subwoofer on the floor near the TV.
Notes:
–To avoid magnetic interference, do not position
the front speakers too close to your TV.
– Allow adequate ventilation around the DVD
system.
OR
pg 001-046_MCD759D_37_Eng 2007.6.21, 14:3910
Loading ...
Loading ...
Loading ...