Loading ...
Loading ...
Loading ...
Installing a Carbonator into the Refrigerator
To install a new SodaStream 60L Carbonator in the refrigerator, follow these steps:
1. Open the CO
2
cylinder cover.
• The sparkling water maker is turned o by default. Since the sparkling water maker is
turned o, the “OFF” icon on the display is turned on.
- Refer to Page 43 ; Turning O the Sparkling Water Function.
2. Attach the SodaStream 60L Carbonator to the Regulator, and then rotate it clockwise.
• You must use a Sodastream™ CO
2
cylinder (60L).
• Replacement SodaStream cylinders are available for easy exchange or refill at local
Sodastream retailers.
• Wrap the used cylinder and return it to the person who delivers the new cylinder in USA
and Canada. In Australia and New Zealand, please return empty CO
2
Cylinder to the
service or information counter at your local retailer for exchange/refill.
All costs associated to the refill or exchange of the CO
2
Cylinder are that of the
refrigerator owner.
Thread of CO
2
cylinder is dierent according to country by country.
3. Push the SodaStream 60L Carbonator into the Support.
4. Lock the SodaStream 60L Carbonator into place by pressing the Lever.
• The inner pressure of the Carbonator may make it dicult to press the lever down.
Hold the lever as shown in the illustration on the right, and then push down.
• If you don’t lock the Carbonator into place, the refrigerator won’t produce sparkling water.
• If the Carbonator is not tightly connected to the Regulator, it will leak CO
2
gas, producing
a hiss.
If this occurs, repeat Steps 2, 3, and 4, making sure that the Carbonator is firmly attached
and locked into place.
English - 27
SETTING UP
DA68-03022B (EN)-08.indd 27 2016. 3. 24. �� 3:07
Loading ...
Loading ...
Loading ...