Loading ...
Loading ...
Loading ...
5. With the compressor switched off, insert
the plug into the power socket inside the
vehicle.
6. With the ignition switched on or the engine
running, switch on the compressor.
Let the compressor run for max. 10 minutes to
fill the tire with sealant and achieve a tire infla‐
tion pressure of approx. 2.5 bar.
While the tire is being filled with sealant, the
tire inflation pressure may sporadically reach
approx. 5 bar. Do not switch off the compressor
at this point.
Checking and adjusting the tire
inflation pressure
Checking
1.
Switch off the compressor.
2. Read the tire inflation pressure on the tire
pressure gage.
To continue the trip, a tire inflation pressure of
at least 2 bar must be reached.
Removing and stowing the sealant
container
1. Unscrew the filling hose of the sealant con‐
tainer from the tire valve.
2. Press the red unlocking device.
3. Remove the sealant container from the
compressor.
4. Wrap and store the sealant container in
suitable material to avoid dirtying the cargo
area.
Minimum tire inflation pressure is not
reached
1.
Pull the connector out of the power socket
inside the vehicle.
2. Drive 33 ft/10 m forward and back to dis‐
tribute the sealant in the tire.
3. Screw the connection hose of the compres‐
sor directly onto the tire valve stem.
4. Insert the connector into the power socket
inside the vehicle.
5. With the ignition switched on or the engine
running, switch on the compressor.
Seite 233
Wheels and tires
MOBILITY
233
Online Edition for Part no. 01402983567 - X/17
Loading ...
Loading ...
Loading ...