Loading ...
Loading ...
Loading ...
Fold back the backrest
Without a cargo position:
1. Pull the strap.
2. Fold the rear seat backrest rearward.
With a cargo position:
1.
Pull the strap.
2. Fold the rear seat backrest rearward. The
rear seat backrest first engages in the load‐
ing position.
3. Pull the strap again.
4. Fold rear seat backrest all the way back.
5. Latch the rear seat backrest.
Variable cargo area
floor
Concept
With the variable cargo area floor, the cargo
area can be configured corresponding to trans‐
port requirements.
General information
Follow instructions on securing cargo, refer to
page 194.
Removing the cargo floor panel
1. Fold down the rear seat backrest, refer to
page 196.
2. Fold the rear part of the cargo floor panel
upward.
3. Grasp the cargo floor panel in the rear and
fold up above the locking point of the up‐
per position, refer to page 199.
4. Pull the cargo floor panel backward from
the brackets.
Inserting the cargo floor panel
1.
Push the cargo area floor into the supports
at a shallow angle. The cargo area floor
must engage noticeably.
2. Fold the cargo area floor over downward.
Seite 198
CONTROLS
Cargo area
198
Online Edition for Part no. 01402983567 - X/17
Loading ...
Loading ...
Loading ...