Loading ...
Loading ...
Loading ...
When using the dehumidifier for the first time, run the unit in
continuous mode for 24 hours
When the water tank is full the unit will automatically shut off or
when the tank is removed. The fan motor may continue for a period
of 30 seconds after shut off, this is normal
After the unit has stopped, the unit cannot be restarted for 3 minutes.
This is a safety feature to protect the appliance. If the unit is not
turned off then unit will automatically start after 3 minutes.
The unit has frost protection, this means that when frost builds up
inside the unit the compressor with turn off and the fan will continue
to run to remove the frost. Once the frost is removed the compressor
will operate again.
If power to the unit is broken unexpectedly (power cut), once power is
restored the unit will restart on the function it was running prior to
the power being broken.
Turning the Unit On
• Remove all packaging and plug the unit into a socket.
• Ensure the water tank is correctly positioned, the drain plug is in
place in the back of the unit if you are using the tank to collect the
water.
• Press the Power button to turn the dehumidifier on and off. The
power indicator light will illuminate when the unit is turned on.
• When the unit is first switched on, the display shows the actual
room % humidity level (within 5% accuracy).
• The humidity level can be set using the instructions for “Setting the
Humidity”.
USING YOUR DEHUMIDIFIER
Page 8
Loading ...
Loading ...
Loading ...