Loading ...
Loading ...
Loading ...
10 11
1. Place Brewer upright
on a flat surface,
remove protective
sheet and plug into
outlet.
2. Fill the My Grounds
TM
reusable filter with 2
tbsp. of your choice of
ground coffee. Do not
exceed the MAX fill line.
3. Press lock tab and pull
K-Cup
®
Holder forward.
HOW TO BREW USING MY GROUNDS
TM
FILTER
4. Lift and open the top of
the K-Cup
®
Holder.
5. Place My Grounds
TM
reusable filter inside
of K-Cup
®
Holder and
close K-Cup
®
Holder
Lid.
6. Push K-Cup
®
Holder
back into place. The
locking tab will snap to
lock it in place.
NOTE: Make sure the
edge of the filter is free
and clear of any particles
to avoid leaking.
CAUTION:
• There are two sharp needles that
puncture the K-Cup
®
Pack, one
above the K-Cup
®
Pack Holder
and the other at the bottom of
the K-Cup
®
Pack Holder. To
avoid risk of injury, do not put
your fingers in the K-Cup
®
Pack
Housing Assembly.
• Do not remove K-Cup
®
holder
during the brew cycle.
• Do not remove water reservoir
or open the lid during the brew
cycle.
• Do not brew without K-cup
®
Holder in place.
9. Place a coffee cup or
travel mug (up to 10oz)
on the drip tray plate.
10. Press the Serving
Size Button to
choose 6 oz or 10 oz.
A light will indicate
your selection.
11. Press Strong Brew to
adjust brew strength
for bold taste if you
like a stronger cup.
7. Remove water
reservoir and reservoir
lid, then fill with filtered
or bottled water below
the MAX fill line. Do
not exceed the MAX
fill line.
8. Close reservoir lid and
slide reservoir back
into place.
NOTES:
A. Always brew with
reservoir in place and
with lid closed.
B. For convenience
water reservoir holds
up 24-oz of water to
avoid constant refilling.
Ensure the cup or
mug can hold the
liquid based on the
brew size selected.
C. Any liquid overflow
from your cup will be
collected by the drip
tray to keep brew
space neat and clean.
BVMC-SC500 Series_16ESM1.indd 10-11 5/5/16 10:44
Loading ...
Loading ...
Loading ...