Loading ...
Loading ...
Loading ...
6ninjakitch en.com
ENGLISH
SAVE THESE INSTRUCTIONS
34 If at any time the blender cup becomes
warm to the touch, or steams or vents
while blending, immediately stop blending
ingredients and turn off the unit.
35 DO NOT perform grinding operations
with the blender cups and Pro Extractor
Blades
®
Assembly.
36 Remove the Pro Extractor Blades
Assembly from the blender cup upon
completion of blending. DO NOT store
ingredients before or after blending them in
the cup with the blade assembly attached.
Some foods may contain active ingredients
or release gases that will expand if left in
a sealed container, resulting in excessive
pressure buildup that can pose a risk of
injury. For ingredient storage in the cup,
use only Spout Lid to cover.
37 NEVER place a blade assembly on the
motor base without it first being attached
to its corresponding container and lid.
38 Flashing light indicates ready to operate.
Avoid any contact with blades or moveable
parts.
39 DO NOT attempt to defeat the interlock
mechanism. Ensure the pitcher and lid are
properly installed before operation.
40 DO NOT expose the pitcher, cup,
blade assemblies, and accessories to
extreme temperature changes. They may
experience damage.
41 NEVER leave the appliance unattended
while in use.
42 If you find unmixed ingredients sticking to
the sides of the pitcher, use the included
tamper, with the lid locked on the pitcher,
to dislodge ingredients when unit is
operating. If not using the tamper, stop
the appliance, remove the lid, and use a
spatula to dislodge ingredients. NEVER
insert your hands into the pitcher, as
you may contact one of the blades and
experience a laceration.
43 DO NOT attempt to remove the pitcher,
pitcher lid, or cup from the motor base
while the blade assembly is still spinning.
Allow the appliance to come to a complete
stop before removing pitcher, pitcher lid,
or cup.
44 If the appliance overheats, a thermal
switch will activate, temporarily disabling
the motor, and the control panel will not
function when modes are pressed. To
reset, unplug the appliance and allow it to
cool for approximately 15 minutes before
using again.
45 The maximum wattage rating for this
appliance is based on the configuration
of the Bottom Blades and pitcher. Other
configurations may draw less power or
current.
46 DO NOT spray the motor base or screen
with water or other liquids.
47 Turn off the appliance and unplug the
motor base before cleaning.
Loading ...
Loading ...
Loading ...