Loading ...
Loading ...
Loading ...
Features and functions
34
otherwise the handlebars may suddenly
change position, which may lead to an
accident.
EJU31300
Shift lever
The shift lever is located on the starboard
(right) side of the watercraft and is used to
control the reverse gate, which allows the wa-
tercraft to move in reverse or forward.
When the shift lever is in the reverse position,
the watercraft can be launched from a trailer,
or backed up out of tight spots where you can-
not turn around easily.
To shift into reverse:
(1) Release the throttle lever and let the en-
gine speed return to idle.
(2) Pull the shift lever toward you.
WARNING
EWJ00030
● Make sure that the throttle lever is com-
pletely released and that the engine is at
idle before shifting into reverse.
● Do not use the reverse function to slow
down or stop the watercraft as it could
cause you to lose control, be ejected, or
impact the handlebars.
● Use reverse for slow-speed maneuver-
ing only.
● Make sure that there are no obstacles or
people behind you before shifting into
reverse.
● Do not touch the reverse gate while the
shift lever is being operated, otherwise
you could be pinched.
To shift into forward:
(1) Release the throttle lever and let the en-
gine speed return to idle.
(2) Push the shift lever away from you.
EJU31321
Quick Shift Trim System (QSTS)
selector
The QSTS selector is located at the left han-
dlebar grip and is used to adjust the trim angle
of the watercraft.
Operating the QSTS selector changes the an-
gle of the jet thrust nozzle vertically. This
changes the trim angle of the watercraft.
1 Quick Shift Trim System (QSTS) selector
2 QSTS selector lock lever
UF1X12E0.book Page 34 Thursday, June 14, 2007 10:24 AM
Loading ...
Loading ...
Loading ...