Loading ...
Loading ...
Loading ...
Features and functions
31
NOTE:
● While the engine is running, input from the
remote control transmitter is not received.
● Refer to local hazardous waste regulations
when disposing of transmitter batteries.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) this device may not cause
harmful interference, and (2) this device must
accept any interference received, including in-
terference that may cause undesired opera-
tion.
CAUTION:
ECJ00030
Changes or modifications not expressly
approved by the party responsible for
compliance could void the user’s authori-
ty to operate the remote control transmit-
ter.
EJU31150
Engine stop switch
Push the engine stop switch (red button) to
stop the engine normally.
EJU31160
Engine shut-off switch
Insert the clip, on the end of the engine shut-
off cord, under the engine shut-off switch
(black button). The engine will stop automati-
cally when the clip is removed from the
switch, such as if the operator falls off the wa-
tercraft.
WARNING
EWJ00010
● Always attach the engine shut-off cord
to your left wrist and the clip to the en-
gine shut-off switch BEFORE starting
the engine.
● To prevent accidental starting of the en-
gine or unauthorized use by children or
others, always remove the clip from the
engine shut-off switch when the engine
is not running.
1 Engine stop switch
1 Clip
2 Engine shut-off cord
3 Engine shut-off switch
UF1X12E0.book Page 31 Thursday, June 14, 2007 10:24 AM
Loading ...
Loading ...
Loading ...