Loading ...
Loading ...
Loading ...
4_safetyinformation
• In order to avoid the creation of a flammable gas-air mixture if a leak in the refrigerating
circuit occurs, the size of the room in which the appliance may be sited depends on the
amount of refrigerant used.
• The room must be 1m
3
in size for every 8g of R600a refrigerant inside the appliance.
• Never start up an appliance showing any signs of damage. If in doubt, consult your
dealer.
• Please dispose of the packaging material for this product in an environmentally friendly
manner
• Do not change the pars in the refrigerator at random.
SEVEREWARNINGSIGNS
• Do not install the refrigerator in a damp place or place where it may come in contact
with water.
- Deteriorated insulation of electrical parts may cause an electric shock or fire.
• Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room
heaters or other appliance.
• Do not place a lighted candle or open ames on the refrigerator.
- This may result in electric shock or fire.
• Allow sufficient space to install the refrigerator on a flat surface.
- If your refrigerator is not level, the internal cooling system may not work correctly.
• Use 220~240V power. Do not plug several appliances into the same multiple power
board. The refrigerator should always be plugged into its own individual electrical which
has a voltage rating that matched the rating plate.The refrigerator must be grounded.
- This provides the best performance and also prevents overloading house wiring
circuits,which could cause a fire hazard from overheated wires.
• Never unplug your refrigerator by pulling on the power cord. Always grip plug firmly and
pull straight out from the outlet.
- Damage to the cord may cause a short-circuit, fire and/or electric shock.
• Make sure that the power plug is not squashed or damaged by the back of the
refrigerator.
• Do not bend the power cord excessively or place heavy articles on it.
- This constitutes a fire hazard.
• Do not use a loose socket or a cord that shows cracks or abrasion damage along its length
or at either end.
• If the power cord is damaged, have it replaced immediately by the manufacturer or its
service agent.
• When moving the refrigerator, be careful not to roll over or damage the power cord.
• Do not insert the power plug with wet hands.
• Disconnect the power before cleaning or maintaining your refrigerator.
- Do not use a wet or damp cloth when cleaning the pulug.
• Remove any foreign matter or dust from the power plug pins.
- Otherwise there is a risk of fire.
• If the refrigerator is disconnected from the power supply, you should wait for at least ten
minutes before plugging it back.
• If the wall socket is loose, do not insert the power plug.
- There is a risk of electric shock or fire.
• The appliance must be positioned so that the plug is accessible after installation.
• Do use separate and reliable earthing power. Don’t share a socket with other
appliances. In order to ensure safety, the socket and its connecting wire must be able to
bear over 10A current.
WARNING
WARNING
safety information
Loading ...
Loading ...
Loading ...