User Manual - Page 12

For RS554NRUASL/SA. Also, The document are for others Samsung models: RS554NRUA**, RS552NRUA**, SRS583NLS, SRS582WW, SRS603HLS, RS554NRUASL

Loading ...
Loading ...
Loading ...
12_settingup
LEVELINGTHEREFRIGERATOR
Now that the doors are back on the refrigerator, you will want to make sure the refrigerator is level so you can
then make final adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even.
The front leg of the refrigerator is adjustable. Adjust right and left leveling legs to keep the refrigerator stable.
setting up your side-by-side
refrigerator
MAKINGMINORADJUSTMENTSTOTHEDOORS
Remember, a leveling refrigerator is necessary for getting the doors perfectly even.
Rotate to the left and
unscrew the left leveling
leg to the ground with a flat
screw driver.
Rotate to the left and
unscrew the right leveling
leg to the ground with a flat
screw driver.
SETTINGUPTHEREFRIGERATOR
Now that you have your new refrigerator installed and in place, you are ready to set up and enjoy the full
features and functions of the appliance.
By completing the following steps, your refrigerator should be fully operational. If not, first check the power
supply and electricity source or try the troubleshooting section at the back of this user guide. If you have
any further questions, contact your Samsung Electronics service center.
1. Place the refrigerator in an appropriate location with reasonable clearance between the wall and the
refrigerator. Refer to installation instructions in this manual.
2. Once the refrigerator is plugged in, make sure the interior light comes on when you open the doors.
3. Set the temperature control to the coldest temperature and wait for an hour.
The freezer should get slightly chilled and the motor should run smoothly.
4. After powering the refrigerator, it will take a few hours to reach the appropriate temperature.Once
the refrigerator temperature is sufficiently cool, you can store food and drink in the refrigerator.
Whenthefreezerdoorislowerthan
thefridge
Whenthefridgedoorislowerthanthe
freezer
Adjustmentpart
Adjustmentpart
Raise
Lower
Insert the wrench (4 mm) from the axle
hole at bottom of the lower hinge, and
rotate it; Face the refrigerator door,
rotate and rise from left to right, rotate
and descend from right to left;
For safety reasons, adjust the
front side a little higher than
the rear side.
Loading ...
Loading ...
Loading ...