Loading ...
Loading ...
Loading ...
10
Fitting the adjustable feet
The adjustable feet must be fitted to the base of the cooker before use.
Rest the rear of the cooker on a piece of the polystyrene packaging exposing
the base for the fitting of the feet.
IMPORTANT
Take care not to damage the cooker during this operation.
Fit the four legs by screwing them tight into the support base as shown.
Levelling the cooker
●
The cooker may be levelled by screwing the lower ends of the feet IN or OUT.
●
Small adjustments may be made to the cooker in the upright position, however it
may be necessary to tip the cooker again to make larger adjustments.
Fitting the adjustable feet covers (optional)
If using the adjustable feet covers fit these while the cooker is tipped over.
!1FITTING THE ADJUSTABLE FEET
3 Note: gently bend the edges of the
inner cover to adjust the tension
between the two parts if needed.
5 Stand cooker back upright. 6 Adjust the inner panels of the foot
covers to suit height of cooker
feet.
4 Secure covers to brackets using
the provided screws
2 Assemble the feet covers by slotting
the inner cover inside the outer cover.
1 Tip cooker onto its back and fix
brackets to mounting holes.
Loading ...
Loading ...
Loading ...