Loading ...
Loading ...
Loading ...
16
HDMI device
DVI device
Audio cord (not supplied)
VGA cable (not supplied)
Monitor Display modes
MODE Resolution Refresh rate
VGA 640x480 60Hz
WVGA 848x480 60Hz
SVGA 800x600 60.3Hz
XGA 1024x768 60Hz
WXGA 1280x720/768 60Hz
Rear lower of the Plasma Display
To connect the Plasma Display to a HDMI or a DVI device
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed
digital video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only the video signal.
Separate analog audio cords are required.
Rear lower of the Plasma Display
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
Audio cord (not supplied)
HDMI cable (type A connector)
(not supplied)
To DVI output
To HDMI out
or
To PC AUDIO
IN jack
To PC IN
Connections to other equipment
NOTE:
You must choose an appropriate setting for each connection
36
.
To connect the Plasma Display to a PC (Personal Computer)
Before you connect this Plasma Display to your PC, change the adjustment of your PC’s Resolution and
Refresh rate (60 Hz).
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to
the
VGA connector PC MONITOR on the back of the
Plasma Display
. Attach the connectors firmly with
the screws on the plug.
In case of a Multimedia computer, connect the audio cable to the audio output of
your Multimedia computer and to the AUDIO connector of the PC AUDIO IN jack of the Plasma Display.
Switch on the computer. The Plasma Display can operate as the computer monitor.
Note:
If there is no video signal from the computer when the unit is in PC mode, “NO SYNC. SIGNAL” will appear
on the
TV-screen for approx. 10 seconds.
3U81641A [E] P13-17 9/16/05, 7:26 PM16
42PD380TA-P1
HITACHI
Loading ...
Loading ...
Loading ...