Loading ...
Loading ...
Loading ...
Installation Instructions
22
asher Connections for Portable Model
W
Use the Complete hose provided with the washer for a one-faucet connection.
Make sure the temperature selector is set at cold
One-Faucet Connections
Remove the complete hose from
inside the washer
Tighten the water filter to the faucet.
Attach the water supply hose to the cold water
valve inlet (BLUE color).
Make sure the washer is inside the complete hose
before tightening.
Tighten the hose, ensuring the threads are aligned
properly for tightest fit. Inspect for kinks or
binding of the hose.
1
2
3
Connect to valve inlet
4
5
Tighten water filter
Attach the faucet connector to the faucet adapter
by pulling down on the locking collar while
lifting up on the connector until it snaps into
place. Make sure the water filter provided is in
place.
Connect to water supply
Attach the drain hose to the rear of the washer.
Install the clamp on the drain hose and tighten
to prevent leakage of water.
Connect drain hose
[ Complete Hose ]
Drain hose
Water
Supply Hose
Clamp
Faucet Connector
Water Filter
Faucet
Water Filter
Locking
Collar
Faucet Connector
Loading ...
Loading ...
Loading ...