Loading ...
Loading ...
Loading ...
Operating Instructions
10
T
unction of Each Button
F
● The FUZZY program is used for average
day-to-day washing.
● Press the POWER button to turn power on.
● Load clothes.
● Press the START/PAUSE button.
● The water level lights will scroll up and down while
the washer is determining the optimum water level
for your load.
● Add detergent, bleach, and softener as desired
into the appropriate dispenser.
● Close the lid.
Fully automatic control
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
8minutes at maximum and decreased by 4 minutes at maximum.
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
DELAY START (RESERVATION) BUTTON
• Use to set a delayed finishing time.
• The time increases when the button
is pushed.
• The following settings are indicated
as the button is pushed 3
4 5
...11 12 14 16 ...46
48 3 HOUR.
• To cancel delay time, turn the power
switch off.
(refer to page 16)
• Use to adjust the WATER LEVEL as required. The
appropriate amount of Detergent is shown next to the
WATER LEVEL in the WATER-DETERGENT diagram
• WATER LEVEL is automatically selected for FUZZY
program.
The following settings are indicated as the button is pushed
LARGE LARGE . EX-LARGE
EX-LARGE SMALL SMALL • MEDIUM
MEDIUM MEDIUM • LARGE LARGE
WASHING CONDITION INDICATOR
• It only operates in FUZZY Program.
• During being detected by the sensor, the LED flashes green, orange
and red in turn. And, after detecting, the LED lights a specific color according to the detecting
condition as follows:
If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.) is
determined as better than the standard one, it optimizes the algorithm to save the energy by
decreasing washing time/strength, and the LED automatically turns to red.
If the current washing condition is determined as worse than the standard one, it optimizes the
algorithm by increasing washing time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one, the algorithm has
no change and the LED turns to green.
• Use to select Water Temperature.
Pressing the button allows you to select
WARM (HOT&COLD) HOT
COLD WARM (HOT&COLD)
respectively.
WATER TEMPERATURE BUTTON
OPTION BUTTON
WATER LEVEL BUTTON
(INDICATION OF DETERGENT AMOUNT)
• According to kinds of
laundry, Air Dry, soiled
extent or washing habit you
can select suitable OPTION
manually.
• By pressing the button
OPTION is changed.
(refer to page 17)
Note
Loading ...
Loading ...
Loading ...