1. Home
  2. Samsung
  3. Samsung LS24F352FHNXZA User Manual
  4. Page 30

User Manual - Page 30

For LS24F352FHNXZA. Also, The document are for others Samsung models: STAINLESS STEEL TO CLEAN STAINLESS STEEL SURFACES USE A DAMP CLOTH WITH A MILD, NON-ABRASIVE CLEANER SUITABLE FOR STAINLESS STEEL SURFACES. REMOVE THE CLEANER RESIDUE AND THEN DRY WITH A CLEAN CLOTH. THE STAINLESS STEEL USED TO MAKE THE DRYER DRUM PROVIDES THE HIGHEST RELIABILITY AVAILABLE IN A GE APPLIANCES DRYER. IF THE DRYER DRUM SHOULD BE SCRATCHED OR DENTED DURING NORMAL USE, THE DRUM WILL NOT RUST OR CORRODE. THESE SURFACE BLEMISHES WILL NOT AFFECT THE FUNCTION OR DURABILITY OF THE DRUM.

Loading ...
Loading ...
Loading ...
30
Eye Saver Mode
Set to an optimum picture quality suitable for eye relaxation.
TÜV Rheinland “Low Blue Light Content” is a certification for products which meet requirements for
lower blue light levels. When Eye Saver Mode is 'On', the blue light that wavelength is around 400nm
will decrease, and it will provide an optimum picture quality suitable for eye relaxation. At the same
time, the blue light level is lower than in the default settings, and it was tested by TÜV Rheinland and
certified as it met the requirements of TÜV Rheinland “Low Blue Light Content” standards.
Game Mode
Configure the product screen settings for game mode.
Use this feature when playing games on a PC or when a game console such as PlayStation™ or Xbox™ is
connected.
―
This menu is not available when Eye Saver Mode is enabled.
―
When the monitor turns off, enters power-saving mode or changes input sources, Game Mode turns Off
even if it is set to On.
―
If you want to keep Game Mode enabled all the time, select Always On.
Response Time (S24F350FH*/S24F352FH*/
S24F354FH*/S24F356FH*/S24F359FH*/
S27F350FH*/S27F352FH*/S27F354FH*/
S27F358FW*/S27F359FH*/S32F351FU*)
Accelerate the panel response rate to make video appear more vivid and natural.
―
It is best to set Response Time to Standard or Faster when you are not viewing a movie.
Picture Size
Change the picture size.
―
This option is not available when FreeSync is enabled.
In PC mode
• Auto: Display the picture according to the aspect ratio of the input source.
• Wide: Display the picture in full screen regardless of the aspect ratio of the input source.
In AV mode
• 4:3: Display the picture with an aspect ratio of 4:3. Suitable for videos and standard broadcasts.
• 16:9: Display the picture with an aspect ratio of 16:9.
• Screen Fit: Display the picture with the original aspect ratio without cutting off.
―
The function may not be supported depending on the ports provided with the product.
―
Changing the screen size is available when the following conditions are satisfied.
―
A digital output device is connected using the HDMI/DP cable.
―
The input signal is 480p, 576p, 720p, or 1080p and monitor can display normally (Not every model can
support all of these signals.).
―
This can only be set when the external input is connected through HDMI/DP and PC/AV Mode is set to AV.
Loading ...
Loading ...
Loading ...