Loading ...
Loading ...
Loading ...
Load Letter or A4 Size Paper
in Paper Tray #1 / Paper
Tray #2
• If the [Check Paper] setting is set to
[On] and you pull the paper tray out of
the machine, a message appears on the
LCD asking if you want to change the
paper type and paper size. Change the
Paper Size and Paper Type settings if
needed, following the LCD instructions.
• Load only one size and type of paper in
the paper tray at a time.
• When you load a different paper size in
the tray, you must change the Paper
Size setting in the machine or the paper
size setting on your computer.
Doing this enables the machine to
automatically feed paper from the
appropriate tray if Auto Tray Select has
been set in the machine or printer driver.
These instructions describe how to load paper
in Tray #1. The steps for Tray #2 are very
similar.
1
Pull the paper tray completely out of the
machine as shown by the arrow.
When you load paper in Tray #2, remove
the tray top cover (1).
1
2
Gently press and slide the paper width
guides (1) and then the paper length
guide (2) to fit the paper size.
Make sure the triangular mark (3) on the
paper width guide (1) and paper length
guide (2) line up with the marks for the
paper you are using.
1
3
2
3
3
Fan the stack of paper well to avoid
paper jams and misfeeds.
10
Loading ...
Loading ...
Loading ...