Loading ...
Loading ...
Loading ...
15
EN
EXTERIOR SURFACES
• Clean the surfaces with a damp microfibre cloth.
If they are very dirty, add a few drops of pH-neutral
detergent. Finish off with a dry cloth.
• Do not use corrosive or abrasive detergents. If any of
these products inadvertently comes into contact with
the surfaces of the appliance, clean immediately with
a damp microfibre cloth.
INTERIOR SURFACES
• After every use, leave the oven to cool and then
clean it, preferably while it is still warm, to remove
any deposits or stains caused by food residues. To
dry any condensation that has formed as a result of
cooking foods with a high water content, leave the
oven to cool completely and then wipe it with a cloth
or sponge.
• The door can be easily removed and refitted to
facilitate cleaning of the glass.
• Clean the glass in the door with a suitable liquid
detergent.
ACCESSORIES
Soak the accessories in a washing-up liquid solution
after use, handling them with oven gloves if they
are still hot. Food residues can be removed using a
washing-up brush or a sponge.
Do not use steam cleaning
equipment.
Use protective gloves during all
operations.
Carry out the required
operations with the oven cold.
Disconnect the appliance from
the power supply.
Do not use wire wool, abrasive
scourers or abrasive/corrosive
cleaning agents, as these could
damage the surfaces of the
appliance.
CLEANING
Do not touch the oven during the Pyro cycle.
Keep children and animals away from the oven
during and after (until the room has nished airing)
running the Pyro cycle.
This function enables you to eliminate cooking
spatters using a temperature of over 400 °C. At this
temperature, food residues turn into deposits that can
be easily wiped away with a damp sponge once the
oven has cooled down.
If the oven is installed below a hob, make sure that
all the burners or electric hotplates are switched off
while running the self-cleaning cycle.
Remove all accessories from the oven before
running the Pyro function (including the shelf
guides).
For optimum cleaning results, remove the larger bits
of dirt with a damp sponge before using the Pyro
function.
It is advisable to run the Pyro function only when
the appliance is very dirty or gives off bad odours
during cooking.
Please note: The oven door cannot be opened while
pyrolytic cleaning is in progress. It will remain locked
until the temperature has returned to an acceptable
level.
Ventilate the room during and after the pyrolytic
cleaning cycle (until the room has been completely
aired out).
CLEANING THE COOKING COMPARTMENT
WITH THE PYRO CYCLE
Loading ...
Loading ...
Loading ...