Loading ...
Loading ...
Loading ...
CHOCOVISION REV V 5
ASSEMBLY
BEFORE USING YOUR MACHINE,
WASH ALL COMPONENTS THAT
MAY COME INTO CONTACT
WITH CHOCOLATE USING A
SOFT SPONGE OR CLOTH AND
MILD SOAP.
MACHINE ASSEMBLY
Lower the BOWL into your machine and rotate it
until it fits into place (Fig. 1).
Place the SCRAPER into corresponding slot on
the BAFFLE (Fig 2). SCRAPER will not stay in
place until entire BAFFLE is screwed-down into
position. When properly installed the SCRAPER
should curve toward the front of the machine.
Fit the BAFFLE into the BOWL making certain
that the contact “strips” on the BAFFLE and the
machine’s BAFFLE MOUNTS are aligned. Thread
the BAFFLE KNOBS onto both BAFFLE MOUNTS
(Fig. 4). If the BAFFLE is not installed properly, an
error message (INSTALL BAFFLE) will appear on
the display screen and the machine will not start.
FIG. 1
FIG. 2
FIG.3
FIG.4
Fit the BAFFLE CLIP on to the BAFFLE (Fig. 3).
The BAFFLE CLIP prevents chocolate from
overflowing out of the BOWL when it is rotating.
Loading ...
Loading ...
Loading ...