Loading ...
Loading ...
Loading ...
Installation
Installation
English18
STEP 3 Adjust the levelling feet
1. Gently slide the washing machine into
position. Excessive force may damage
the levelling feet.
2. Level the washing machine by manually
adjusting the levelling feet. The
levelling feet can be loosened using the
provided spanner.
3. When levelling is complete, tighten the
nuts using a screwdriver as shown.
NOTE
An adjustable wrench or 17 mm open-end
wrench is required to loosen or tighten the
leveling feet.
STEP 4 Connect the water hose
The provided hose adaptor may differ with the model. This step guides you through
connecting the connector-type adaptor. If you are provided with the screw-type adaptor,
go to 7.
B
A
• Make sure you use a new water hose,
and there are rubber gaskets (B) inside
the couplings (A) at either end of the
water hose. A water hose without the
gasket may leak.
• If there is a water leak, stop using the
washer and contact a local Samsung
service center. A water leak may cause
electric shock.
• Do not stretch the water hose by force.
If the hose is too short, replace the hose
with a longer, high-pressure hose.
• To prevent leaks, make sure both water
hoses are not bent or kinked. A water
leak may cause electric shock.
WF16J6500EV_DC68-03665C_EN.indd 18 2017/10/20 14:27:52
Loading ...
Loading ...
Loading ...