Loading ...
Loading ...
Loading ...
5
INSTALLATION INSTRUCTIONS
STEP 1 - UNPACK THE
REFRIGERATOR
WARNING
Excessive Weight Hazard
Use two or more people to move and install refrigerator.
Failure to do so can result in back or other injury.
WARNING
Fire or Explosion Hazard
Do not puncture refrigerant tubing.
Follow handling instructions carefully.
Flammable refrigerant used.
Failure to do so can result in death, explosion or fire.
IMPORTANT: Handle with care when moving to avoid either
damaging the refrigerant tubing or increasing the risk of a leak.
REMOVE THE PACKAGING
•
Remove tape and glue residue from surfaces before turning on
the refrigerator. Rub a small amount of liquid dish soap over the
adhesive with your ngers. Wipe with warm water and dry.
•
Do not use sharp instruments, rubbing alcohol, ammable
uids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of your refrigerator. For more
information, see “Refrigerator Safety.”
•
Dispose of/recycle all packaging materials.
When Moving Your Refrigerator:
Your refrigerator is heavy. When moving the refrigerator
for cleaning or service, be sure to cover the oor with
cardboard or hardboard to avoid oor damage. Always pull
the refrigerator straight out when moving it. Do not wiggle or
“walk” the refrigerator when trying to move it, as oor damage
could occur.
CLEAN BEFORE USING
After you remove all of the packaging materials, clean the inside
of the refrigerator before using it. See the cleaning instructions in
“Refrigerator Care.”
Important information to know about glass shelves and
covers:
Do not clean glass shelves or covers with warm water when
they are cold. Shelves and covers may break if exposed to
sudden temperature changes or impact, such as bumping.
Tempered glass is designed to shatter into many small, pebble-
size pieces. This is normal. Glass shelves and covers are heavy.
Use both hands when removing them to avoid dropping.
STEP 2 - DOOR REVERSING
(OPTIONAL)
The door hinges are factory installed on the right-hand side. If
you want the doors to open from the opposite direction, you can
reverse the door swing.
IMPORTANT:
•
Before you begin, unplug the refrigerator, or disconnect power.
•
Remove food and the bins from the refrigerator door.
•
The door hinges are designed to be right-hand swing or left-
hand swing specic. Replace the right-hand hinges with the left-
hand hinges provided in the parts bag. After removing, keep the
right-hand hinges in case you would need to reverse the door
swing.
Parts Provided:
•
Top Hinge
•
Center Hinge
•
Bottom Hinge
Tools Needed:
•
Flat-blade Screwdriver
•
Phillips-head Screwdriver
•
8 mm Socket Wrench
REMOVE AND REVERSE REFRIGERATOR
DOOR
1. Unplug refrigerator or disconnect power.
2. Pull down to remove the hinge screw covers from the wiring
cover.
NOTE: The wiring cover spans the width of the cabinet top.
ba
a Wiring Cover
b Hinge Screw Covers
Loading ...
Loading ...
Loading ...