Loading ...
Loading ...
Loading ...
►Surface of the iron
• After unplugging and cooling the iron, simply wipe off with a
damp cloth and if necessary, use a mild detergent.
• Never use any strong cleaners.
►Soleplate
• Starch and other residue may be easily removed from the
soleplate with a damp cloth.
• To avoid scratching the surface, never use a metallic pad to
clean the soleplate, and never place the iron on a rough
surface.
• The best way to remove synthetic residue from the soleplate
is to iron over an old cotton cloth rag after heating the iron.
Note:
• Never use cleaners in the iron, since they may damage the
working parts of the iron. Some odor may be released during
initial use of the iron, however, this is normal and the odor
will not attach to your clothes. Never use steam iron
detergent in the iron, since they may damage the working
parts of the iron.
Q&A
Question Answer
Why click sound or
metallic sound be heard
while using or shaking the
iron?
These sounds are made by
the internal parts of the iron,
spray mechanism, leakage
prevention, etc., moving
slightly. This is normal.
Why do the clothes
sometimes become
brown after being ironed?
If there is laundry detergent
remaining on the fabric, the
clothes may become brown
after being ironed.
Why are there white
powder/particles coming
out of the steam vents
while using the steam
function (especially when
using " power shot ")?
The powder/particles are
hydrophilic treatment or
impurities and minerals
found in hard water etc.
These are not harmful and
can be brushed off clothing.
14
15
English
English
Trouble shooting
Problem Causes, Solution
No heating
Make sure the power plug is plugged into
a
120V AC
household outlet.
No steam
Poor
steaming
power
Fill the water tank with tap water up to
"
MAX
"
dot.
No spray
Water leaks
from steam
vents
Clothes are
marked
If there is no steam, set the steam/dry
selector to the steam position, or set the
temperature selector to " MAX ".
For poor steam, move the steam/dry
selector several times, then reset to the
steam position.
Press the power shot button several times
when the " power shot " appears insufficient.
Wait until the thermostat operating
Indicator light goes off before using
the iron.
Set the temperature selector to " MAX ".
Push the spray mist trigger several times.
Empty the water tank and fill it with clean
water. There may be contaminants in the
iron/cup.
Fill the water tank with tap water up to
"
MAX
"
dot.
Press the power shot button in intervals of
at least 2 seconds when using the " power
shot ".
Wait until the thermostat operating indicator
light goes off before using the iron.
Specifications
Model No.
NI-U600C
Power source
120 V 60 Hz
Power consumption
Weight (approx.)
Dimension (approx.)
This iron is intended for household use only.
1.5 kg
(3.3 lb)
297 x 125 x 142 mm
(11.7 x 4.9 in. x 6 in.)
1 700 W
How to care for your iron
Loading ...
Loading ...
Loading ...