Loading ...
Loading ...
Loading ...
Open the water valve to flush the
lines, and check leakage in the water
connectors. If any leak, please check
that if the lines are fully inserted
where the connector leaked. If not,
please install them again, and make
sure that the lines are fully inserted.
Warning!
After turning on the water valve,
make sure that there
are no leaks at
all connection points along the water
lines. If there is any leakage, turn off
the valve immediately and tighten the
water connector or refix the tubes
ensuring they are fully inserted into
the connectors, then retest for leaks.
Note:
After connect the filter outlet line
with the refrigerator(as shown in the
diagram below), please dispense
several cups of water to flush the lines
before use.
Care must be taken to avoid
crushing, piercing or kinking the
water lines.
11
FLOW
Loading ...
Loading ...
Loading ...