Loading ...
Loading ...
Loading ...
12
INSTALLATION
EN
Installation Place
Requirements
Before installing the appliance, check the following
information to make sure that the appliance
should be installed in a correct place.
Installation Location
This appliance must be installed on firm flooring
to minimize vibration during the spin cycle.
Concrete flooring is best, being far less prone to
vibration during the spin cycle than wooden
floorboards or a carpeted surface.
If it is impossible to avoid positioning the
appliance next to a gas cooker or coal burning
stove, an insulation (850 X 600 mm) covered with
aluminum foil on the side facing the cooker or
stove must be inserted between the two
appliances.
Ensure that when the appliance is installed, it is
easily accessible for an engineer in the event of a
breakdown.
When installing the appliance, adjust all four feet
using the transit bolt spanner provided to
ensure the appliance is stable.
Floor Installation
To ensure sufficient clearance for water inlet hoses,
drain hose and airflow, allow minimum clearances
of at least 20 mm at the sides and 100 mm behind
the appliance. Be sure to allow for wall, door, or
floor moldings that may increase the required
clearances.
WARNING
This appliance must only be used for domestic
household purposes and should not be used in
mobile applications.
NOTE
Never try to level any uneven floor by putting
pieces of wood, cardboard or similar materials
under the appliance.
Wooden Floors (Suspended
Floors)
When installing the appliance on wooden floors,
use rubber cups to reduce excessive vibration and
unbalance. Timber or suspended type flooring may
contribute to excessive vibration and unbalance,
errors and malfunction.
To reduce vibration, we recommend placing at
least 15 mm thickness of rubber cups
a
under
each adjusting foot of the appliance, secured to
at least two floor beams with screws.
If possible, install the appliance in one of the
corners of the room, where the floor is more
stable.
Fit the rubber cups to reduce vibration.
CAUTION
If the appliance is installed on the unstable floor
(e.g. wooden floor), the warranty does not cover
any damages and cost occurred due to the
installation on the unstable floor.
A
100 mm
B
5 mm
C
20 mm
A C
B
C
Loading ...
Loading ...
Loading ...