Loading ...
Loading ...
Loading ...
Lower the vehicle to the ground
and remove the jack.
Tighten the wheel nuts securely in
the same crisscross pattern. Have
the wheel nut torque checked at
the nearest automotive service
facility.
Tighten the wheel nuts to:
Remove the center cap before
storing the flat tire in the trunk
well.
Place the flat tire face down in the
sparetirewell.
Remove the spacer cone from the
wing bolt, turn it over, and put it
back on the bolt.
Securetheflattirebyscrewing
the wing bolt back into its hole.
Put on the spare tire. Put the
wheel nuts back on finger-tight,
then tighten them in a crisscross
pattern with the wheel nut wrench
until the wheel is firmly against
the hub. Do not try to tighten
them fully.
12.
13.
14.
15.
16.
17.
18.
Changing a Flat Tire
180
WING BOLT
SPACER
CONE
80 lbf·ft (108 N·m , 11 kgf·m)
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...