Loading ...
Loading ...
Loading ...
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb by turning it one-
quarter turn counterclockwise.
Insert the new bulb into the hole
and turn it one-quarter turn clock-
wise to lock it in place.
Push the electrical connector back
onto the bulb. Make sure it is on
all the way.
Turn on the headlights to test the
new bulb.
(Driver’s side)
Reinstall the upper part of the
windshield washer reservoir.
Install the holding clip on the stay
and lock it by pushing on the
center of clip. If you are changing the bulb on
the driver’s side, start the engine,
turn the steering wheel all the way
to the right, and turn off the
engine. If you are changing the
bulb on the passenger’s side, turn
the steering wheel to the left.
2.
4.
5.
6.
3.
7.
1.
Lights
Replacing the Front Side Marker/
Turn Signal and Parking Light
Bulb
160
BULB
CONNECTOR
TAB
HOLDING CLIP
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...