Loading ...
Loading ...
Loading ...
39
If you entered a frequency that has already been entered
elsewhere, the scanner sounds an error tone and displays the
channel that was duplicated. If you entered the frequency
by mistake, press .Clr twice to clear the frequency and enter
a dierent one. To enter the frequency anyway, press E to
accept.
Erasing a Stored Frequency
1. Find the frequency you want to erase. Press Hold.
2. Press Func + Pgm.
3. Press 0 and then press E.
4. The displayed frequency changes to all 0s.
SCANNING
When you store frequencies into channels, those channels
are grouped into banks. Each bank contains 50 channels. You
can store service channels and non-service channels in the
same bank. For example, you can store a city’s re, police,
marine, etc, together with utilities and other businesses.
There is no frequency range restriction per bank.
While you are scanning frequencies stored in the banks,
the word SCAN scrolls across the display. When it nds a
transmission, that frequency displays.
Enabling/Disabling Channel Banks
You can enable and disable each channel bank. When you
disable a bank, the scanner does not scan any of the 50
channels in that bank.
In Scan modes, press the number key that corresponds to
the bank you want to disable or enable. That bank number
Loading ...
Loading ...
Loading ...