Loading ...
Loading ...
Loading ...
26
3. Connect the other end of the USB cable to the
computer’s USB port or to an AC or DC adapter that
provides USB charging power.
Note: If you connect to a computer’s USB port, the PC will
prompt you for the drivers for your scanner. To download and
install these drivers, go to http://info.uniden.com/UnidenMan4/
SR30C.
4. The scanner displays CHArg and the low battery icon
while it charges the batteries. The screen goes blank
after the scanner is completely charged.
Dierent status messages may display, depending on the
battery type and scanner status:
LCD Message Batt.
Type
Meaning Scanner
Cond.
CHArg Ni-MH Scanner is charging. Off
None Ni-MH Unit is charged. Off
None Ni-MH Scanner is not
charging (Battery
selection switch is
set to Alk.)
Off
Err CHArg Ni-MH Batteries cannot
be charged (dead
battery).
Off
ILEgAL Ni-MH USB external power
is out of range.
Off
If the batteries are good, the scanner charges the batteries.
and it operates normally. If the scanner cannot immediately
Loading ...
Loading ...
Loading ...