AR-208D User Manual

Loading ...

- 9 -

USER PROGRAMS FOR THE

NETWORK EXPANSION KIT

When the network expansion kit is installed in the machine, the following programs are added to the

user programs for Print mode.

The IP address and other network settings are configured using these user programs.

Additional user programs for Print mode

The procedure for selecting a user program setting is explained in "SELECTING A SETTING FOR

A USER PROGRAM" in the operation manual.

Program

number

Program name

Settings (factory

default settings

appear in bold)

Explanation

4 ENABLE TCP/IP

1: YES

2: NO

This program must be enabled to use the

machine on a TCP/IP network. "IP ADDRESS

SETTING" must also be configured.

This program is initially enabled (factory default

setting).

5 ENABLE DHCP

1: YES

2: NO

If "YES" is selected (factory default setting) and

the machine is connected to a TCP/IP network,

the IP address will be acquired automatically.

If you will manually assign an IP address using

"IP ADDRESS SETTING", select "NO".

IP ADDRESS

SETTING

• IP ADDRESS

• SUBNETMASK

• DEFAULT GATEWAY

This program is used to set the IP address (IP

address, Subnet Mask, and Gateway) of the

machine when TCP/IP protocol is used on the

network.

When "ENABLE DHCP" is selected, the

machine will obtain an IP address

automatically. This is the factory default setting.

ENABLE

NETWARE

1: YES

2: NO

This program must be enabled to use the

machine on a network that uses NetWare

protocol.

This program is initially enabled (factory default

setting).

ENABLE

ETHERTALK

1: YES

2: NO

This program must be enabled to use the

machine on a network that uses EtherTalk

protocol.

This program is initially enabled (factory default

setting).

ENABLE

NETBEUI

1: YES

2: NO

This program must be enabled to use the

machine on a network that uses NetBEUI

protocol.

This program is initially enabled (factory default

setting).

Note

Loading ...

User Manual - Page 217