Shark NV752 Questions & Answers
You can find answers or submit your question.
In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.
You should also read the documentation for your own answers. Download documentation for this product here.
My hose from the vacuum floor pad into the body is separated. I cannot access it as it is in the swivel neck that connects the pad to the body to repair or replace the hose. I have taken off the back flip cover but the tracked hose is in the swivel area. Any hope to repair it?
How do you change the roller on this vaccine???
my hose connection will not click back in after it was released for cleaning use
- Empty the dust cup and clean the filters. - Check for blockages in the hose, accessories, and inlet openings. - Ensure you hear an audible click at all connection points, including where the hose meets the back of the pod. You may need to apply additional force and pull on the hose to ensure the latch is fully engaged.
How to clean filters and how to put them back together
To clean the filters, please turn off and unplug the vacuum. Then, remove the dust cup and take out the filters. Rinse the foam and felt filters with water, and tap off loose dirt between washes. For the HEPA filter, remove the grill by pulling the Filter Access latch, then rinse the HEPA filter. Allow all filters to dry completely before placing them back into the vacuum.
The spinning brush does not spin anymore on my vaccum, can you assit with some help or tell me how to get a new part for it?
Submit your question
If you have any questions about this product, please ask here.
