You can find answers or submit your question.
In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.
You should also read the documentation for your own answers. Download documentation for this product here.
my iron has suddenly stopped working. no power light when plugged in but then the power light starts to flash continuously and iron is cold. please help
In this case, please contact the Russell Hobbs Customer Service Department by calling 0345 658 9700 or via email [email protected]
Not long new iron has never produced steam on steam setting!
The steam control may have been set to the no steam position. Set the steam control to a steam position. There is no water in the tank and/or the settings are not set correctly. Solution: Ensure there is water in the tank. Set to the appropriate steam and temperature setting - When steam ironing, you must set the steam control to steam and the temperature control to a temperature equal to or higher than the steam symbol on the dial.
my 3100w iron does not reheat 3-5minutes after the first heat up although the light goes on and off automatically
Make sure the iron is plugged into a working mains power and set the temperature dial to a desired position. It is normal for the orange pilot light to turn on and off during ironing. It comes on as the iron is heating up, and goes off when it is hot enough.
I have 3100w Russell Hobbs, immediately I plug in into a socket it get heated but after 2-3minutes the heat gradually goes down although the light goes off and comes on with no beep and no reheating. kindly help
My iron only heats up a but not hot. It was bought In Tesco 2 months ago. It was working fine until today
If you have any questions about this product, please ask here.