Craftsman CMXGRAM1130036 Questions & Answers
You can find answers or submit your question.
In ManualsFile, you can ask and answer questions about your issues. We - volunteers - or other people who own the product will help you.
You should also read the documentation for your own answers. Download documentation for this product here.
30 Questions
Will cold weather affect the operation of this mower? Below freezing the mower will not move across yard and warmer weather it runs fine.
What are valve settings
Is there any way to tighten the belt I had to change the deck engagement cable and when I reattached the deck the belt is way to loose.
You can read details in the "Changing the Deck Belt" section at:
What oil filter do I use on my T 210 ,42 inch tractor
Does anyone know where I can find a Fuel Shutoff Solenoid with wiring harness? I have looked everywhere. Thanks
What size is drive belt from engine to transmission
The drive belt is part number 954-04249A with dimensions (Length x Width): 70.9 x 0.656 in
where on Craftsman 2018 500cc 17.5HP #CMXGRAM 1130036 is starter solenoid located?
I shifter function is not changing the speeds of my tractor it stays in high gear will not switch to lower gears or go into park mode
The The forward/reverse lever keeps popping out of forward when I go from reverse to forward. How can I fix that?
- Start the engine.
- Turn the ignition key from the NORMAL MOWING position to the REVERSE CAUTION MODE position of the ignition switch.
- Press and hold the REVERSE CAUTION MODE BUTTON at the top, right corner of the ignition module for 3 seconds. The red indicator light at the top, left corner of the ignition module will be ON while activated.
- Once activated (indicator light ON), the tractor can be driven in reverse with the PTO (Blade Engage) in the engaged (ON) position.
- Always look down and behind before and while backing up slowly to make sure no children are around. After resuming forward motion, return key to the NORMAL MOWING position to return to normal mowing operation. The REVERSE CAUTION MODE will remain activated until:
- The key is placed in either the NORMAL MOWING position or STOP position.
- The operator leaves the seat/the parking brake is set (manual PTO).
Does the Craftsman T110 riding mower have the ability to mow in reverse?
Yes, you can see details in the "Reverse Caution Mode" section on page 17 of the User Manual: https://manualsfile.com/download/pdza4v5lbc.html
Thank you for your response. Funny - last night I got ahold of the owner's manual and noticed the explanation on Page 17.
How to remove the fuel filter?
- Locate the fuel filter, which is located on the left side of the engine, and may be attached to the engine with a tie strap.
- Cut the tie strap, if present, then pinch the in-line clamp on the fuel filter with a pair of pliers, slide the clamp up the fuel line.
- Pull the fuel line free from the filter and place the open end of the line into an approved container to drain the fuel.
1 likeThe PTO (blade engage) Lever is located on the lawn tractor’s right fender.
The yellow (safty button) what is that for and Willits disable the mower?
WHERE IS FUSE BOX
The fuse can be found at the rear of the unit, underneath the fender located by the battery.
do you need to check the transmission fluid in. this model or is it a sealed transmission
The T110 has a manual/gear transmission.
Value adjustment what's the gap
Who proof read this manual ? They could not have graduated from 3rd or 4th grade. I would be embarrassed to work for this Co.
Which grass catcher will work for this mower?
how to remove the wheels
Remove the wheels by removing the lock nuts and shoulder screws which secure them to the deck. https://manualsfile.com/product/pdza4v5lbc.html#:~:text=Remove%20the%20front%20and%20rear%20deck%20gauge%20wheels
I just bought this mower, the battery is charged and it doesn't even try to start. How do I find out if my warranty covers the repair?
1 likeDo you have the yellow lever all the way down
What size battery and type U1R or U1L?
The battery is part number 925-1707D and it is located under the seat.
The drive belt is part number 954-04249A. Belt Length: 70.9 in; Belt Top Width: 0.656 in
What's the part number for the blade engagement chord for the T 110 w 42 inch deck?
The blade part # is 942-04308, the spindle part # is 918-06991.
Why does motor stop with pto engaged and tractor in reverse
how do i find parts list for deck on this mower
Please go to the mtdparts.com website with model number 13AN77XS093 to use the Parts Diagrams search. The diagrams contain parts lists and parts numbers.
How do I unlock brake?
To release the parking brake: Depress the brake pedal and the parking brake lever will automatically move out of the parking brake position. In a sudden situation, fully depress the brake pedal to bring the lawn tractor to a stop and then immediately move the speed control lever to the “N” neutral position.
What type of oil is needed for this riding tractor?
We recommend SAE 10w-30 oil.
What type of oil is needed for this riding tractor?
We recommend SAE 10w-30 oil.
Deck Height: Is there a way to adjust the deck height between setting 2 and setting 3 ? For me, 3 is too high and 2 is too low. I have tools.
Craftsman T110 Riding Tractor
Thank YouHow do I get the grass deflector down? Bought yesterday & it’s pointing up.
Ask a Question about Craftsman CMXGRAM1130036
If you have any questions about this product, please ask here.
